By skyforbes Last sunday I picked up an old apc device. I thought it would be easy to break into. I was wrong. It had an rh installation that booted with no ip address. The management interface did have an ip address, but was only running http. No browser I tried was supported. It has 2 network devices fyi. It would not boot from usb unless the internal, 40gb ide hard drive was disconnected. It would not boot from and openbsd iso… I disconnected the hard drive, plugged in the usb ports on the motherboard, and booted from 32bit debian. When the installer started, I plugged the hard drive in. I was able to get debian installed in about 3 hours. It is working, slowly. 234mb of ram lol. What would you folks use this for?